×

Laser & TIG Welded Tube & Pipe Mill Systems

Designed for the most precise fabrication of stainless steel and other precious metals such as copper, brass, platinum, titanium and even gold, T&H Lemont Laser and TIG mills provide the tightest tolerances for production. The mandate behind our unparalleled design is, in a word, control. Control over everything that can go wrong. With inline bright annealing systems and in-line weld operations; potential contamination of the seam is virtually eliminated.

A multi-cathode TIG welder provides simultaneous, constant and controlled arcs. Air driven jaw assemblies deliver near-zero distortion in end cuts, all managed and monitored with multi-section digital electronic controls. Our unique sequential welding configuration means increased mill throughput and performance by combining a power source with a high frequency arc that initiates the weld and shielding gas flow, all aimed at optimum consistency and integrity of the seam.

With all this rigid science at work, you still have the range and flexibility of varied production specifications such as four and six roll water cooled weldboxes with guide shoe capabilities all geared towards maximum versatility in product yield.

T&H Lemont understands the need for absolute control of your mill to ensure consistent and uncompromised quality of your product – the core upon which you stake your reputation and the same on which we build ours. No other mill system on the market delivers the weld integrity and tight tolerances of our Laser & TIG mills. And when you are working with expensive raw materials, yield and utilization is at an equal premium with output.

Combined with the uniform interfaces of our individual mill components and ancillary equipment, we are the only mill manufacturer to offer a complete system – providing you with a single source – and a single point of responsibility for every point of every process, from conception to installation and training.

REQUEST A QUOTE »

T&H Lemont

5118 Dansher Rd., Countryside, IL 60525 USA

Technical Specifications

Item #Mill TypeO.D. Capacity RangeWall Size CapacityMaterial CapacityShape Capacity
WU-8Laser, TIG0.090 – 0.035 in 2.3 – 9.5 mm0.006 – 0.035 in 0.15 – 9 mmNonferrous AlloysRound
WU-11Laser, TIG0.150 – 0.750 in 3.8 – 19 mm0.010 – 0.050 in 0.25 – 1.3 mmNonferrous AlloysRound
WU-1MLaser, TIG0.250 – 1.000 in 6.4 – 25.4 mm0.020 – 0.065 in 0.5 – 1.6 mmNonferrous AlloysRound
WU-15Laser, TIG, Multicathode0.500 – 2.500 in 12.7 – 63.5 mm0.020 – 0.134 in 0.5 – 3.4 mmNonferrous AlloysRound and Shapes
WU-20HLaser, TIG, Multicathode0.500 – 3.000 in 12.7 – 76.2 mm0.030 – 0.160 in 0.762 – 4 mmNonferrous AlloysRound and Shapes
WU-25Laser, TIG, Plasma, Multicathode0.750 – 3.500 in 19 – 88.9 mm0.025 – 0.160 in 0.64 – 4 mmNonferrous AlloysRound and Shapes
WU-35Laser, TIG, Plasma, Multicathode1.000 – 4.500 in 25.4 – 115 mm0.060 – 0.240 in 1.5 – 6 mmNonferrous AlloysRound and Shapes
WU-40Laser, TIG, Plasma, Multicathode1.500 – 5.500 in 38.1 – 139.7 mm0.060 – 0.280 in 1.5 – 7.1 mmNonferrous AlloysRound and Shapes
WU-50Laser, TIG, Plasma, Multicathode2.000 – 6.625 in 50.8 – 220 mm0.080 – 0.330 in 2.0 – 8.4 mmNonferrous AlloysRound and Shapes
WU-60Laser, TIG, Plasma, Multicathode2.000 – 8.625 in 50.8 – 219 mm0.120 – 0.437 in 50.8 – 219.00 mmNonferrous AlloysRound and Shapes